
Above this is the one of the product images of the EWK Tools CVJ CV Joint Remover Removal Puller Tool 95mm. To get other pictures, you can click on the image above.
Here you can see the product details.
- 1. Place the tool under the axle. Align the "neck" of the lower jaw with the damping slot of the boot or with the narrowest section of the axle.
- 2. Adjust the lower jaw to a suitable distance with the adjustment holes - remember to leave enough threads visible so you can tighten the locking nut.
- 3.Apply some lubricant to the washer and to the lock nut.
- 4. Then screw the lock nut until the lock ring inside the joint release the joint from the axle.
- Before purchasing, please kindly check our following policy.

Once you've learned the details above, You need to know how many people who have bought this product instead? Please check here!!
After looking at some of the testimonials, surely you've been thinking about the next picture, Between Buy or not is your decision, when it's sure please click here, if You are still not able to see related products on Amazon's site, exactly here.
About the place where you can buy, you don't have to worry, if you are in the United States (US), meaning it is highly recommended to buy it on amazon's site, you can open the site here.
Ok, Thank You. We wish to assist you in selecting a quality product.

No response for "EWK Tools CVJ CV Joint Remover Removal Puller Tool 95mm Review"
Post a Comment